MaxxECU Street (ECU Only OR Premium Kits)
MaxxECU Street (ECU Only OR Premium Kits) - Image 2
MaxxECU Street (ECU Only OR Premium Kits) - Image 3
MaxxECU Street Premium
MaxxECU Street Premium
MaxxECU Street Premium
MaxxECU Street Premium
MaxxECU Street Standard Kit Single Harness
MaxxECU Street Premium Kit Harnesses and LSU 42
MaxxECU Street ECU Only

MaxxECU Street (ECU Only OR Premium Kits)

Price range: £759.00 through £903.00

Includes VAT & UK Postage

Can be purchased as ECU only or as a choice of kits with harnesses and LSU 4.2, please select from the drop down

SKU: N/A Categories: ,

Description

Advanced entry-level engine control system for up to 6 sequential cylinders. Up to 12 in wasted spark

Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost.

Get started faster with the easy-to-use MTune PC-software

Selected features

  • Aluminium casing
  • Boost control
  • Shift-cut
  • Internal loggings
  • Flex fuel
  • Advanced warning system
  • Built-in wideband lambda
  • Launch control
  • Anti-lag

Target engines for MaxxECU STREET

  • All 1-12 cylinder engines (4-stroke)
  • Up to 6 cylinders fully sequentially
  • Up to 12 cylinders in wasted spark

MaxxECU STREET inputs

  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2, 4.9
  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
  • 2 extra temperature sensors. Can be used as switches or to control additional functions
  • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
  • 2 digital inputs used for example for speed sensors (Hall) or switches
  • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost

MaxxECU STREET outputs

  • 6 injectors outputs. High impedance only
  • 6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
  • 4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (5A)

MaxxECU STREET technical

  • CAN bus (additional wires required)
  • USB communication for tuning with MTune
  • 8MB memory for internal logging, up to 1000Hz
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • Weight: 520g
  • 140x134x42mm (including mounting points, excluding connector)
  • Aluminium casing
  • 6 injector outputs (high impedance)
  • 6 ignition outputs
  • 4 extra outputs (GPO)
  • 4 extra analog inputs
  • 2 extra digital inputs
  • CAN bus (additional wires required)

Products included

Premium kit includes:

  • 1 pcs 1764 – MaxxECU STREET unit with no accessories
  • 1 pcs 1763 – MaxxECU STREET flying lead harness 3m
  • 1 pcs 107 – Lambda Sensor Bosch wideband lambda LSU 4.2
  • 1 pcs 894 – Connector 6-way socket housing (LSU 4.2 wideband sensor)
  • 1 pcs 924 – MaxxECU USB PC cable 1.5m (STREET/V1/RACE)
  • 1 pcs 928 – MaxxECU hose kit (MAP sensor incl nipples)
  • 1 pcs 1852 – MaxxECU Quick Guide (English)
  • 1 pcs 1910 – MaxxECU STREET wiring diagram (printed)
  • 1 pcs 927 – Connector 12-way socket housing GT150 (fits MaxxECU harness)
  • 2 pcs 1235 – MaxxECU sticker

Standard kit includes:

  • 1 pcs 1764 – MaxxECU STREET unit with no accessories
  • 1 pcs 1763 – MaxxECU STREET flying lead harness 3m
  • 1 pcs 924 – MaxxECU USB PC cable 1.5m (STREET/V1/RACE)
  • 1 pcs 1767 – MaxxECU push-lock to barb (MAP-sensor)
  • 1 pcs 1910 – MaxxECU STREET wiring diagram (printed)
  • 1 pcs 1852 – MaxxECU Quick Guide (English)
  • 1 pcs 927 – Connector 12-way socket housing GT150 (fits MaxxECU harness)
  • 2 pcs 1235 – MaxxECU sticker

ECU only includes:

  • 1 pcs 1764 – MaxxECU STREET unit with no accessories
  • 1 pcs 1910 – MaxxECU STREET wiring diagram (printed)
  • 1 pcs 1852 – MaxxECU Quick Guide (English)

Additional information

Kit type

ECU Only (no accessories), Standard Kit – ECU, Harness, Accessories, Premium Kit – ECU, LSU 4.2, Harnesses, Accessories

Reviews

There are no reviews yet.

Be the first to review “MaxxECU Street (ECU Only OR Premium Kits)”

Your email address will not be published. Required fields are marked *

Related products